Educational research reference · Not medical advice · Compounds discussed are research materials, not approved drugs
Home / Stacks / KLOW Blend
Blend · Research Dosing Guide

KLOW Blend Protocol: GHK-Cu + BPC-157 + TB-500 + KPV Dosing (2026)

A research reference for the KLOW blend — four co-formulated peptides in one vial at 80 mg total — with per-component dosing broken out by vial content and a direct comparison to GLOW, which it extends.

KLOW Quick Start

KLOW is a single co-formulated blend of four peptides: GHK-Cu, BPC-157, TB-500 and KPV. The first three are the same trio found in GLOW at the same 50/10/10 mg weights; KLOW adds 10 mg of KPV, an anti-inflammatory tripeptide derived from alpha-MSH. It is dosed as one product; the sections below break out what each component a given draw delivers.

Quick reference Combined blend · preclinical
Type
Co-formulated 4-peptide blend
Formats
Vial (SubQ)
Ratio
5 : 1 : 1 : 1
Total content
80 mg per vial
Schedule shape
Once daily

This guide is an educational research reference. It does not diagnose, treat, or prescribe, and is not medical advice. Consult a licensed clinician before considering any compound.

KLOW Composition

Each KLOW vial contains 80 mg total. Like GLOW it is GHK-Cu-dominant by weight, with the three repair peptides each at 10 mg.

ComponentVial contentSharePrimary research focus
GHK-Cu50 mg62.5%Skin / collagen remodeling
BPC-15710 mg12.5%Angiogenesis; tendon / gut repair
TB-50010 mg12.5%Cell migration / soft tissue
KPV10 mg12.5%Anti-inflammatory (α-MSH fragment)

KLOW Dosing Protocol

KLOW is dosed as one product, once daily. Because it is a fixed blend, a single draw delivers all four components at the 5:1:1:1 ratio. The per-component amounts follow directly from the vial content and are shown below.

Injection — Subcutaneous

Reconstituted 80 mg vial, subcutaneous. Doses are stated by mass — the syringe-unit equivalent depends on your reconstitution volume, worked out below.
BandPer doseFrequency
Low1.33 mg blendOnce daily
Reference2.67 mg blendOnce daily
High4 mg blendOnce daily
80 mg + 3 mL BAC → 26.7 mg/mL · per unit: GHK-Cu 167 mcg · BPC-157 33 mcg · TB-500 33 mcg · KPV 33 mcg
At the 2.67 mg reference band — 0.10 mL of a 3 mL reconstitution, or 10 units on a U-100 syringe — a dose delivers GHK-Cu 1.67 mg, BPC-157 0.33 mg, TB-500 0.33 mg and KPV 0.33 mg. As with GLOW, GHK-Cu and BPC-157 land in their usual standalone ranges while TB-500 sits at a lighter maintenance-style level rather than its standalone loading dose.

Cycle guidelines

ApproachDurationReview pointBest for
Standard4–6 weeksWeek 4General research planning
Extended6–8 weeksWeek 6Slower tissue-remodeling endpoints

Off periods of 2–4 weeks are common, partly to limit cumulative copper exposure from the GHK-Cu component.

KLOW Reconstitution Guide

KLOW ships as a lyophilized powder with a blue tint from the GHK-Cu component. A 3 mL reconstitution gives the tidy 300-unit division used throughout this site.

Injection

BACConc.2.67 mg dose
3 mL26.7 mg/mL0.10 mL · 2.67 mg

One reconstitution, one daily draw. Units are U-100 insulin-syringe units.

Per-unit component math

3 mL is 300 units, so each unit carries 1/300th of the vial: GHK-Cu 167 mcg, BPC-157 33.3 mcg, TB-500 33.3 mcg and KPV 33.3 mcg.

Reconstitution steps

  1. Inspect the vial. Confirm the label, expected milligram amount, and that the powder looks dry and intact.
  2. Wipe the stoppers. Use an alcohol swab on both the bacteriostatic water and peptide vial stoppers.
  3. Draw the chosen volume. 3 mL into the vial — this is the number that sets every concentration figure above.
  4. Inject down the wall. Release the water slowly down the inside wall, not directly onto the powder.
  5. Swirl, do not shake. Roll gently until dissolved. Shaking foams and can damage the peptide.
  6. Verify clarity. A blue tint from GHK-Cu is expected. The solution should still be clear rather than cloudy; discard if particulate.
  7. Label and refrigerate. Note the date and volume added on the vial, then store at 2–8 °C. Do not freeze the reconstituted solution.

See the bacteriostatic water guide for diluent handling, or the reconstitution calculator to work any other volume.

Why These Four Together

KLOW extends the GLOW rationale with a fourth mechanism. GHK-Cu drives collagen and matrix remodeling, BPC-157 supports angiogenesis, and TB-500 supports cell migration — the same complementary trio. KPV, the C-terminal tripeptide of alpha-MSH, adds a distinct anti-inflammatory arm: it retains the anti-inflammatory activity of the parent hormone without its pigmentary effects, and is reported to act intracellularly on NF-κB signalling.

GHK-Cu

Collagen and matrix remodeling; dominant by weight.

BPC-157

Angiogenesis and gut/vessel repair signalling.

TB-500

Actin-mediated cell migration into injured tissue.

KPV

Anti-inflammatory α-MSH fragment; reported NF-κB modulation without pigmentary activity.

Who Should Avoid KLOW

The blend inherits every caution that applies to its four components, so the exclusions are the union of all of them.

Tested athletes

TB-500 and BPC-157 are both on the WADA Prohibited List; the blend is therefore prohibited in sport.

Active or prior cancer

Angiogenic and proliferative pathways across several components are a theoretical concern.

Copper-metabolism disorders

GHK-Cu contributes copper at 50 mg per vial; avoid in Wilson's disease.

Pregnancy & lactation

No human safety data for any component in this context.

KLOW Side Effects & Safety

Injection-site reactions

Redness or stinging; the GHK-Cu component can sting more than the others. Rotate sites.

Combined profile

Effects reflect all four components — review each component page rather than treating the blend as one entity.

Copper exposure

GHK-Cu-dominant, so cumulative copper applies; off-periods are the usual mitigation.

Quality-control risk

A four-peptide blend is the hardest kind of product to verify visually — check per-component purity on the COA.

KLOW Evidence Context

Component-level literature

Each of the four has its own preclinical base; GHK-Cu and BPC-157 are the best characterised.

KPV research

Studied largely in gastrointestinal inflammation models, often via oral or topical routes.

Blend data

No dedicated human trial exists for this four-component combination.

Open question

Whether four simultaneous mechanisms outperform the three in GLOW is untested.

Storage & Handling

StateStorageNotes
Lyophilized (powder)−20 °C, protected from lightBlue tint from GHK-Cu is normal.
Reconstituted (liquid)2–8 °CUse within ~30 days per the listing; do not freeze.
AppearanceClear blue solutionDiscard cloudy or particulate solutions.

KLOW vs GLOW

FeatureKLOWGLOW
ComponentsGHK-Cu, BPC-157, TB-500, KPVGHK-Cu, BPC-157, TB-500
Total content80 mg (50/10/10/10)70 mg (50/10/10)
Ratio5 : 1 : 1 : 15 : 1 : 1
Added armKPV anti-inflammatoryNone
PageThis pageGLOW

Frequently Asked Questions

What is in KLOW?

Four co-formulated peptides in one 80 mg vial: GHK-Cu 50 mg, BPC-157 10 mg, TB-500 10 mg and KPV 10 mg.

How does it differ from GLOW?

KLOW is GLOW plus 10 mg of KPV, an anti-inflammatory alpha-MSH fragment. The other three components are at identical weights. See GLOW.

How much of each compound does a dose deliver?

At the 2.67 mg reference band (10 units of a 3 mL reconstitution): GHK-Cu 1.67 mg, BPC-157 0.33 mg, TB-500 0.33 mg and KPV 0.33 mg.

What is KPV?

The C-terminal tripeptide of alpha-MSH (Lys-Pro-Val). It retains the anti-inflammatory activity of the parent hormone without its pigmentary effects, and is reported to act on NF-κB signalling.

How is it reconstituted?

80 mg in 3 mL of bacteriostatic water gives 26.7 mg/mL. Because 3 mL is 300 units, each unit carries 1/300th of the vial.

Is this page medical advice?

No. It is an educational research reference and does not diagnose, treat, or prescribe. Consult a licensed clinician before considering any compound.

KLOW Formats & Sourcing

KLOW is supplied as a lyophilized powder in a single 80 mg vial. There is no pre-reconstituted pen or spray format for this blend. Batch-specific Certificates of Analysis are issued per lot, covering each of the four components.

FormatSupplied as
Vial80 mg total lyophilized blend

Strengths are listed as sold; confirm against the product page and the batch COA before calculating anything.

Reference material for this protocol, with batch COA:

View KLOW on Spyro Peptides →
Purity ≥98% HPLC Batch COA available Research use only

References

  1. Pickart L, Margolina A. Regenerative and protective actions of the GHK-Cu peptide. Int J Mol Sci (2018).
  2. Sikiric P, et al. Stable gastric pentadecapeptide BPC 157. Curr Pharm Des (2011).
  3. Goldstein AL, et al. Thymosin β4: actin-sequestering protein and tissue repair. Ann N Y Acad Sci (2012).
  4. Dalmasso G, et al. PepT1-mediated tripeptide KPV uptake reduces intestinal inflammation. Gastroenterology (2008).
  5. Component-level dosing references are compiled on the linked GHK-Cu, BPC-157 and TB-500 pages.